<form id="mf5k7"></form>

    <nav id="mf5k7"><code id="mf5k7"></code></nav>

    <em id="mf5k7"><source id="mf5k7"></source></em>
        當前位置: 鮑爾浦資訊
        Ultra High Molecular Weight Polyethylene 

        Ultra High Molecular Weight Polyethylene 



        Ultra-high-molecular-weight polyethylene (UHMWPE, UHMW) is a subset of the thermoplastic polyethylene. Also known as high-modulus polyethylene, (HMPE), or high-performance polyethylene (HPPE), it has extremely long chains, with a molecular mass usually between 2 and 6 million amu. The longer chain serves to transfer load more effectively to the polymer backbone by strengthening intermolecular interactions. This results in a very tough material, with the highest impact strength of any thermoplastic presently made.

        UHMWPE is odorless, tasteless, and nontoxic. It is highly resistant to corrosive chemicals except oxidizing acids; has extremely low moisture absorption and a very low coefficient of friction; is self-lubricating (see boundary lubrication); and is highly resistant to abrasion, in some forms being 15 times more resistant to abrasion than carbon steel. Its coefficient of friction is significantly lower than that of nylon and acetal, and is comparable to that of polytetrafluoroethylene (PTFE, Teflon), but UHMWPE has better abrasion resistance than PTFE.


        Development

        Polymerisation of UHMWPE was commercialised in the 1950s by Ruhrchemie AG, which changed names over the years. Today UHMWPE powder materials, which may be directly molded into a product's final shape, are produced by Ticona, Braskem, DSM and Mitsui. Processed UHMWPE is available commercially either as fibers or in consolidated form, such as sheets or rods. Because of its resistance to wear and impact, UHMWPE continues to find increasing industrial applications, including the automotive and bottling sectors. Since the 1960s, UHMWPE has also been the material of choice for total joint arthroplasty in orthopedic and spine implants.


        UHMWPE fibers, commercialized in the late 1970s by the Dutch chemical company DSM, are widely used in ballistic protection, defense applications, and increasingly in medical devices.


        Structure and Properties


        UHMWPE is a type of polyolefin. It is made up of extremely long chains of polyethylene, which all align in the same direction. It derives its strength largely from the length of each individual molecule (chain). Van der Waals bonds between the molecules are relatively weak for each atom of overlap between the molecules, but because the molecules are very long, large overlaps can exist, adding up to the ability to carry larger shear forces from molecule to molecule. Each chain is bonded to the others with so many van der Waals bonds that the whole of the inter-molecule strength is high. In this way, large tensile loads are not limited as much by the comparative weakness of each van der Waals bond.


        When formed to fibers, the polymer chains can attain a parallel orientation greater than 95% and a level of crystallinity from 39% to 75%. In contrast, Kevlar derives its strength from strong bonding between relatively short molecules.


        The weak bonding between olefin molecules allows local thermal excitations to disrupt the crystalline order of a given chain piece-by-piece, giving it much poorer heat resistance than other high-strength fibers. Its melting point is around 130 to 136 °C (266 to 277 °F),and, according to DSM, it is not advisable to use UHMWPE fibers at temperatures exceeding 80 to 100 °C (176 to 212 °F) for long periods of time. It becomes brittle at temperatures below −150 °C (−240 °F).


        The simple structure of the molecule also gives rise to surface and chemical properties that are rare in high-performance polymers. For example, the polar groups in most polymers easily bond to water. Because olefins have no such groups, UHMWPE does not absorb water readily, nor wet easily, which makes bonding it to other polymers difficult. For the same reasons, skin does not interact with it strongly, making the UHMWPE fiber surface feel slippery. In a similar manner,aromatic polymers are often susceptible to aromatic solvents due to aromatic stacking interactions, an effect aliphatic polymers like UHMWPE are immune to. Since UHMWPE does not contain chemical groups (such as esters, amides or hydroxylic groups) that are susceptible to attack from aggressive agents, it is very resistant to water, moisture, most chemicals, UV radiation, and micro-organisms.


        Under tensile load, UHMWPE will deform continually as long as the stress is present—an effect called creep.


        When UHMWPE is annealed, the material is heated to 135 °C to 138 °C in an oven or a liquid bath of silicone oil or glycerine. The material is then cooled down at a rate of 5 °C/h to 65 °C or less. Finally, the material is wrapped in an insulating blanket for 24 hours to bring to room temperature.


        UHMWPE raw material can be extruded to be pipeline by extruding machines, Shandong Buoy&Pipe Industry Co.,Ltd is one of the biggest manufacturer of UHMWPE floating pipe with 26 extruding lines:



        The UHMWPE pipe is widely used for sand/slurry dredging project, mine tailing discharging project and so on, because it has ultra high wear resistant ability:


        UHMWPE floating pipe


        Welcome your inquiry on the UHMWPE pipes to cocoyuan@buoyandpipe.com  Mobile: 8618963565160  Whatsapp/Viber: 15224285781  Skype/wechat: cocoonline2 QQ: 592182185


        News
        About Us



        Home | News | Products Search | WorkShop | Company | Contact us | Online Message
        UHMW PE floating dredging pipeline, plastic floating dredge pipe, wear resistant floating dredge pipe company,
        Sales Hotline:86-635-5085878   Fax:85-635-5081123   Mobile :86-18063561229
        Copyright Shandong Buoy&Pipe Industry Co., Ltd.    Address:No36 Huanghe Road Economic Development Zone Liaocheng City, Shandong Province, China  

        二四六精选特马资料